Is your Canon printer not working correctly? Are you unable to print on your Canon printer but unable to diagnose the issue? Resetting the Canon printer to factory settings might fix the problem.
Resetting a Canon printer to its factory settings restores all its settings to defaults. If the issue is because of a setting that you changed in the past, resetting the printer should fix the problem. However, if the issue is because of a problem with the driver, the Windows operating system, or the printer hardware, resetting will not help fix the problem.
NOTE 1: We recommend trying other easy methods like restarting the printer, restarting the PC where your Canon printer is connected, and updating the printer driver before trying to reset your printer.
NOTE 2: After resetting the printer, you might need to add it to your PC again.
NOTE 3: The official Canon Print app, at least the current version, does not offer an option to reset the printer to factory settings. Besides, there is no way to reset a Canon printer via software.
The following are two easy ways to reset a Canon printer to factory settings.
Method 1 of 2
Reset Canon printer from the printer’s screen
Important: Please note that these directions are for the Canon PIXMA G3780 all-in-one printer. The directions might be slightly different for other models but would be more or less the same.
Step 1: Turn on the printer.
Step 2: On the built-in screen, go to Settings > Device settings > Reset settings.
Step 3: Select the Reset All option and then press the OK button to reset the Canon printer settings to their factory settings.
Select the Yes option and then press the OK button when you get the confirmation prompt. The printer might restart to reset settings to defaults.
Please note that the Reset All option also resets the printer administrator password to the factory default.
Method 2 of 2
Reset a Canon printer without a built-in display
Not all Canon printers have a built-in screen to access the printer’s settings. If your Canon printer does not have a built-in screen, you do not need to worry. Use the physical buttons on the printer to reset settings to their defaults. Here is how.
Step 1: Turn off the printer, if it’s turned on. Keep in mind not to disconnect the printer from the power source. That is, the printer must be connected to a power source but should not be on. In short, it should be plugged in, but the printer must be off.
Step 2: Press and hold the Stop button (red triangle button, usually) for about three seconds.
Step 3: While holding the Stop button (after about three seconds), press and hold the power button.
Step 4: Continue holding the power button, but leave the Stop button now.
Step 5: Now, press the Stop button five times without releasing the power button.
Step 6: You may release the power button now. The printer should now start in a few seconds.
Our how to check Canon printer ink levels in Windows 11 guide might also interest you.
Leave a Reply